How to Encourage Basking for Your Red-Eared Slider Turtle

Encouraging red-eared sliders to bask is important to their health. They should be getting out of the water and drying off on a regular basis. If your turtle is not doing this, you need to look at your tank set up to make sure basking is inviting to your slider.

Red-eared sliders need to bask for several essential reasons beyond simply comfort. Basking involves drying out and absorbing UV rays from the sun or a bulb, which turtles do daily in their natural habitat and should continue to do in captivity.

Ideal Conditions

Make sure you have provided appropriate basking areas as well as a good temperature differential to entice your red-eared slider to bask. The ideal temperatures of the water in the tank should be 75 to 78 degrees Fahrenheit for adults and 78 to 80 degrees Fahrenheit for hatchlings. The basking spot should be considerably warmer, at 90 to 95 degrees Fahrenheit.

If the temperatures (water or basking) are too low, turtles will be sluggish and may not bask. The difference in temperature between the water and the basking spot is also very important, and it's that differential that entices them to bask. If the water is much warmer than recommended or the ambient air temperature is too cool, the turtles will be unlikely to get out of the water to bask.

Basking is essential for the turtle's health. It allows the turtle to completely dry out and warm up. This makes it more difficult for fungal infections to develop because fungus needs moisture to grow. These types of infections are common health conditions for red-eared sliders. It's also a natural behavior that they are born with. If they live in an environment where they cannot bask, they will likely get stressed, which can cause a number of other health conditions.

What You Need

The basking area should be nice and dry, stable, and easy to climb onto. If these conditions aren't met, the turtle will also be unlikely to use your basking area, so make sure you have:

• A ramp
• A heat source, such as a UV light

The turtle needs to get out of the water and onto the basking spot easily enough; this is especially crucial with hatchlings. To create the basking area within the tank, make an easily accessible sloped area where the turtle can climb out of the water to bask. This can be an area elevated above the water using rocks or logs or can be a turtle raft that is sold commercially.

The goal is to create a spot that is partially submerged or has a ramp to allow the turtle to climb out of the water. This spot should be about 10 degrees Fahrenheit warmer than water temperatures to entice basking. Be careful, though: an area that is too hot won't promote basking and may even put the turtle at risk of hyperthermia or burns on its shell. Offering food before turtles bask will let them digest more easily and could be a treat to encourage basking.

Red-eared sliders don't like to be bothered when they're basking. If you interrupt them, they might become startled or begin begging for food. Consider covering the sides of the tank to encourage basking.

UV Light Positioning

Place the heat light over the basking area so the turtle can take full advantage of its heat. Position the light out of reach and not so close that it can burn your turtles, especially if you have a few turtles that stack on top of each other to get closer to the light. Make sure that the bulb can't get wet if the turtles splash; the bulb can shatter when wet, posing a hazard. Leave the heat light on for 10-12 hours during the day. It should be shut off at night to allow the turtle to sleep. It is okay for the turtle tank to cool down at night.

UVB light is not for heat production but so the turtle can produce vitamin D3 to allow absorption of calcium from the diet. It is necessary in addition to the heat lamp and can also be placed over the basking area and left on during the day.

Preventing Problems

Do not treat homemade platforms with any chemicals, and don't allow the metal to rust. Even platforms that are natural or organic can alter the water. The basking platform should be secure and not be prone to movement or dismantling. Make sure your turtle can't wedge itself between the basking area and the tank walls or use the spot to escape.

Ensure the water and basking area temperatures are optimal. Consider setting up privacy screens or reorganizing the tank setup to offer a new environment. If your red-eared slider continues to avoid basking, consulting a veterinarian is advisable.